Orienting the panoramic telescope to mils 64-00

Orienting a 64-00 mils panoramic sight with the PAB-2M aiming circle

Orienting the panoramic telescope to mils 64-00 Ukraine

1. The preliminary setup and orientation of the PAB-2M aiming circle is no different from the usual one. We end up with the aiming circle pointed in the main direction of fire (MDF) and the angle-measuring (red) scales zeroed.

Pay attention to the MDF. If you have chosen the MDF for the gun (in mils 64-00), you need to convert it into thousandths for the aiming circle. You can do this in Kropyva, or by dividing mils by 1.067 (the full number is 1.06666666667).

Example: MDF mils 15-00 / 1.067 = 14-06 thousandths.

So the MDF on the aiming circle will show 14-06 on the black scales, while the angle-measuring (red) scales are zeroed.

2. Lay the aiming circle on the gun's panoramic telescope and subtract the readings of the red scales from 30 if they are less than 30-00; if the readings are greater than 30-00, subtract them from 90.

3. Convert the obtained values back to mils 64-00 using Kropyva, or multiply by 1.067.

Then proceed as usual. Report the data after calculation to the gunner.

Example 1. Aiming circle angle 5-43.
30-00 — 5-43 = 24-57
24-57 × 1.067 = 26-22 to lay on the aiming circle

 

Example 2. Aiming circle angle 35-43
90-00 — 35-43 = 54-57
54-57 × 1.067 = 58-23 to lay on the aiming circle

Also on this site

Why is it so important to fire at higher angles?

This material briefly explains how the projectile’s landing angle affects the effectiveness of engaging the enemy through fragment dispersion.

Conversion of propellant charges

able for converting bagged propellant charges into the MACS modular system

Modular charge system

Demonstration video of the design and operation of the DM72 (DM52) modular charge system

Range tables for specific projectiles

Tables of minimum and maximum range for M107, M110, M483, M485, M549, M795, M825, M864 projectiles

Calibrating the sighting devices of the FH70 gun

To calibrate the quadrant:
Place the 155 mm FH-70 self-propelled towed howitzer on a hard surface, lower its support plate and raise the wheels.

Informative content

Painting of 155 mm artillery projectiles

Ammunition components are painted primarily to prevent rust. Colors are used for camouflage, for recognizing the main use of the item and for identifying hazardous fillers used in the munitions. These are the colors used to indicate the main use of ammunition.

read more

LOT – batch identification number. How to read it

LOT — decoding of the production lot identification number

Codes of all manufacturers of military products at this link: MIL-HDBK-1461

Projectile marking by weight signs

Weight class
(number of squares)
HE M107HE EFRBHE EFRB-BB
□41.34 to 41.8443.79 to 44.2945.85 to 46.35
□ □41.84 to 42.3443.79 to 44.7945.85 to 46.85
□ □ □42.34 to 42.8444.29 to 44.7946.35 to 46.85
□ □ □ □42.84 to 43.3444.79 to 45.2946.85 to 47.35
□ □ □ □ □43.34 to 43.8445.29 to 45.7947.35 to 47.85
□ □ □ □ □ □43.84 to 44.3445.79 to 46.2947.85 to 48.35

Weight categories

MarkingProjectile weight
in ascending order (kg)
Average weight
of category (kg)
dP (1 tile) (kg)
•42.001 to 42.50042.2500.500
••42.501 to 43.00042.7500.500
•••43.001 to 43.50043.2500.500
••••43.501 to 44.00043.7500.500
•••••44.001 to 44.50044.2500.500

Note: Projectiles OE 155 F2, OE 155 F1, OX 155 F1 and OFUM F2A have the same weight categories (projectiles fitted with the PD M 557 fuze)

DODIC - US Department of Defense identification code

Calculating the length of a leg of a right triangle

Calculating the length of a leg of a right triangle

Insufficient data for calculation

Oleh Syrota (Georgich©) for the Armed Forces of Ukraine /

Share your experience of working with 155 mm ammunition.
Send comments and suggestions by email: entropiaw@gmail.com